VOLTAGE: 90 ~ 264 VAC FULL RANGE FREQUENCY : 47 ~ 63 HZ INPUT CURRENT: 4.0A(RMS) FOR 110VAC; 2.0A(RMS) FOR 220VAC INRUSH CURRENT: 35A MAX. FOR 110 VAC; 70A MAX. FOR 220 VAC
Output Voltage
Output Current Min.
Output Current Max.
Output Current Peak
Regulation Load
Regulation Line
Output Ripple & Noise Max.P-P
+5V
0
20.00
±5%
±1%
50mV
+12V
0.1
20
±5%
±1%
120mV
-12V
0
0.3
±5%
±1%
120mV
+3.3V
0
20
±5%
±1%
50mV
+5VSB
0.1
2.5
±5%
±1%
50mV
1. THE OUTPUT POWER OF +5V & +3.3V NOT EXCEED 150 WATTS 2. +5V, +3.3V AND +12V, -12V TOTAL OUTPUT MAX.: 230W 3. TOTAL POWER: 240W
* TEMPERATURE RANGE: OPERATING 0℃ --- 50℃, STORAGE –20℃~80℃ * HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE & EFFICIENCY: 78%±2 TYPICAL AT 230V, FULL LOAD; EFFICIENCY CALCULATION: WHEN CALCULATING OUTPUT POWER, INTERNAL FAN CURRENT SHALL BE INCLUDED WITH 12V OUTPUT. * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OVER POWER PROTECTION: 110~170% * OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V * SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB * EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B * LEAKAGE CURRENT: 3.5MA MAX. AT NOMINAL VOLTAGE 264VAC * SAFETY: MEET UL 60950-1, CSA 22.2 NO 60950-1, TUV IEC 60950-1, CCC * MEET IEC-1000-3-2 CLASS D
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.