亚洲国产91综合在线观看_日本一区二区不卡久久入口_国产va自拍东京热 尤物_一区二区三区免费视频网站

JBYS-Y防爆防腐應急熒光燈(ⅡC) JBYS-Y Explosion-proof Corrosion-proof and Emergency Fluorescent Lamp (ⅡC)

1. 爆炸性氣體環境危險場所：1區、2區； 2. 可燃性氣體、蒸氣級別：ⅡA、ⅡB、ⅡC； 3. 溫度組別：T1~T6； 4. 戶內、戶外(IP65)； 5. 可配裝雙管熒光燈。 1. For the dangerous sites with explosive air mixture: 1division, 2division; 2. Flammable gas, steam class: ⅡA、ⅡB、ⅡC; 3. Temperatures classification: T1~T6; 4. Indoor and outdoor (IP65); 5. The fit with dual-pipe fluorescent lamp is available.           1. 殼體采用耐沖擊、耐老化、阻燃、抗靜電、強度高的SMC工程塑料模壓成形或采用不銹鋼板拉伸成形，外形美觀、大方。 2. 燈罩采用聚碳酸酯注塑而成，透光性好，并能承受強撞擊。 3. 外殼采用密封式結構，具有防水、防塵、防腐蝕等優點。 4. 內裝電子鎮流器和電感鎮流器，及我公司獨特的充砂型鎮流器, 單腳熒光燈和雙腳熒光燈可供用戶隨意選用。 5. 燈具具有開蓋斷電獨具的電器聯鎖裝置。 6. 照明應急兩用燈。 7. 應急電源為免維護鎳鎘電池組，在正常供電條件下自動充電，事故斷電或停電時應急燈自動轉換為電池組供電，應急燈自動點亮。 8. 電纜布線。 9. 符合GB3836-2000、IEC60079、GB12476.1-2000、IEC62241標準要求 。 1. The case body adopts impact-resistance, aging resistance, fire inhibiting, antistatic and high strength SMC engineering plastic. 2. The lampshade is casted by polycarbonate, with high transpareny and impact withstanding ; umbrella; 3. The shell is sealed, with performances of water-proof dust-proof, corrosion-proof; 4. Inner fitted is electronical ballast and inductive ballast and own special sand-filled ballast. The single- or dual-foot fluorescent lamp is for choice. 5. The light has the interlock device that can cut power in case of capping. 6. Dual-fuction light of lighting and emergency 7. Emergency power is non-maintenance nickel-cadmium battery under the normal power-supplying condition, the emergent lamp will turn on when the power lose because of accident or power faiulre. 8. cable wiring; 9. Suitable for GB3836-2000、 IEC60079、GB12476.1-2000、IEC61241 standard request.

光源種類 Luminous source sorts 防護等級 Protection category 防爆標志 Explosion-proofing maker 防腐等級 Corrosion-proofing grade 電纜外徑 Cable's outside diameter (mm) 熒光燈 Fluorescent lamp IP65 Exed Ⅱ CT6 WF2 Φ10

正常燈功率 Normal lmap power (W) 燈頭型號 Socket model 防護等級 Protection category 防爆標志 Explosion- proofing maker 防腐等級 Corrosion- proofing grade 進線口螺紋 Inlet's thread 20×2 20 正常 Normal: AC220±10% 應急 Emergent: DC7.2 0.3 30 1.5 40×2 40