關鍵字:test,bench,噴油泵試驗臺基地,生產噴油泵試驗臺test,bench,常年研發噴油泵試驗臺 dbzz噴油泵試驗臺功能介紹:
噴油泵試驗臺根據所調試的油泵,選用適當?shù)母骄,可進行如下項目的調試:
1測試不同轉速下噴油泵的各缸供油量和供油均勻性。
2測試噴油泵的供油始點及供油間隔角度。
3調速器工作性能的檢查及調整。
4壓力補償性能的測試及檢查。
5分配泵工作性能的測試及調整。
6冷啟動裝置及電磁閥性能檢查。
7分配泵各種轉速下的回油量測量。
8分配泵各種轉速下的內壓測定。
9噴油泵密封性能實驗。
10檢查輸油泵自吸功能。
11內置高可靠性臥式打氣泵。
12三“T”型工作臺、寬體定位支架,設備運轉穩定 油泵試驗臺生產廠家 一三八五四八二二三九五12PSB系列噴油泵實驗試驗臺生產基地
采用工業計算機標準,可靠性高
按照“人機工程學”原則設計,布局合理,使用方便
強電系統采用SSR固態繼電器無觸點控制,安全可靠
上位機采用電子盤和DOS平臺,抗震、耐沖擊
壓力、溫度、提前角等參數均為屏幕數顯
The purpose of the pump test-bed
The oil pump of pump test-bed based on the debugging and selection of appropriate affix, debugging for the following projects:
1 testing the fuel injection pump under different rotation speed of each cylinder oil and oil supply uniformity.
2 test of the fuel injection pump fuel supply starting point and interval Angle oil.
3 speed governor and adjust the working performance of the inspection.
4 pressure compensation performance test and check.
5 distribution pump performance test and adjustment.
6 cold start device and electromagnetic valve performance examination.
7 allocated amount of oil pump under different rotation speed measurement.
8 distribution of internal pressure measurement of the pump under different rotation speed.
9 for fuel pump seal performance experiment.
10 check oil transfer pump self-priming function.
11 the built-in high reliability horizontal pump.
12 three "T" type workbench, wide-bodied positioning support, equipment operation stability |